IE 11 is not supported. For an optimal experience visit our site on another browser.

'Vampire' modems, routers waste $1 billion a year

Wireless routers can use more electricity than you think.
Wireless routers can use more electricity than you may think.Matt Rourke / AP

Chances are you’ve never thought about how much electricity your high-speed modem and Wi-Fi router use. And why would you?

Small network equipment doesn’t require very much electricity, but these home energy vampires are typically left on and suck power even when they are not doing anything.

A new analysis done for the Natural Resources Defense Council shows that electricity used by the modems and routers in the average American home equals that of a new 32-inch flat screen television. Put another way, that’s more than twice as much as a new 14-inch Energy Star laptop and 30 times more than a cellphone charger that is always plugged in.

And a little bit of wasted energy in every home can add up to a huge problem on a national scale.

According to the report, the equipment that keeps us constantly connected to the Internet – now in nearly 90 million American homes – uses about $1 billion worth of electricity annually.

“These small, innocuous black boxes that never sleep consume enough electricity each year to power all 1.2 million homes in the Silicon Valley area,” said NRDC senior scientist Noah Horowitz.

The NRDC report, Cutting Energy Costs to Connect to the Internet, estimates that it takes all of the electricity produced by three power plants to keep this small network equipment constantly running across the country.

“These energy vampires put greater pressure on the power grid which leads to more carbon emissions,” said Suzanne Jones, vice president of marketing at the Association of Energy Services Professionals. “It’s just waste; a waste of energy and money.”

A few manufacturers already make energy-efficient modems and routers, but it’s difficult to spot them because there is no Energy Star standard for this home equipment.

“The better mousetrap already exists,” Horowitz told me. “It’s time for that innovation to be a standard feature in the new modems and routers we buy at the store or receive from our Internet providers.”

The NRDC estimates that if all of this inefficient equipment were replaced with devices that used 25 percent less energy, it would cut the country’s electric bills by $330 million a year.

Manufacturers respond: Let’s not get overly excited

The companies that make home electronics insist they are concerned about energy efficiency and have been working on better home networking technology.

Doug Johnson, vice president of technology policy at the Consumer Electronics Association (CEA), believes the NRDC report needs to be put into perspective. The amount of electricity required to power modems and routers is a very small portion of your total home energy use, he told NBC News.

“Let’s not make a mountain out of a molehill, if it’s truly a molehill,” Johnson said.

According to CEA’s data, the typical home routing devices use about $5 to $6 worth of electricity a year which is about the same as a new 32-inch TV. By comparison, the average household spends about $15 a year to power the video game console, $75 to run the refrigerator and around $200 for lighting.

“And it’s a tremendous value considering all the benefits we get as a result of networking and connection to the Internet – which include saving energy in various ways,” he said.

Things are about to change

We should see significantly more energy-efficient modems and routers on the market in 2014.

The Environmental Protection Agency is developing a new Energy Star standard for modems, routers and other equipment used for network connectivity. The final draft of the specifications is expected this summer with an effective date of either late summer or early fall.

The electronics industry supports the idea of Energy Star certification for these devices.

So what can you do right now? You can turn your networking equipment off before you go to bed or leave the house for extended periods of time. Studies show some people do that. But, frankly, that can be a pain – and the system may need to reboot if you turn it off.

Energy expert Suzanne Jones said a smart power strip is a better option.

“A smart power strip can detect when devices that are plugged into it are not being used and they will power down those devices to a trickle charge,” Jones explained. “When the devices go back into use they immediately power back up which is transparent to the user.

It’s a little more expensive than a regular power strip by the savings can really add up. And why pay for electricity you don’t need?

More information:

The new Consumer Electronics Energy Calculator helps you get a general idea of how much it costs to power the various electronics in your home.

Herb Weisbaum is The ConsumerMan. Follow him on Facebook and Twitter or visit The ConsumerMan website.