Explainer: Ten leaps forward in car technology
English physicist, mathematician and astronomer Sir Isaac Newton once famously wrote — with perhaps a touch of false modesty — that “If I have seen a little further it is by standing on the shoulders of giants.”
Thus has the car industry incrementally improved from its primordial horseless carriage beginnings to the magic carpet ride of today’s almost incomprehensibly complex machines with their raft of safety, environmental and convenience devices adding to the basic transportation function.
Here are 10 of the car industry’s most important technological changes.
It all began with Karl Benz and his construction of a self-propelled, three-wheel vehicle powered by a single-cylinder 0.75-horsepower engine using a leather belt and two bicycle chains to transmit power to the rear wheels.
However modest this beginning, with its exposed engine parts and whirling bits menacing anyone who examines it too closely, the 1886 Benz launched the industry and was the foundation of today esteemed Mercedes-Benz brand. (Maybe the leather upholstery was an early clue to the company’s luxury intent?)
1912 Cadillac with electric starter
The electric starter — invented by Charles Kettering at his Dayton Engineering Laboratories Co. (Delco) in 1911 — became standard equipment on Cadillacs in 1912, paving the way for all cars to feature electric starters. This accelerated the industry standardization of gasoline internal combustion engines over steam and electric designs. It also put more women behind the wheels of cars because prior to the electric starter they tended to avoid using difficult-to-start, hand-cranked cars.
1914 Ford Model T
Introduced in 1908, the Model T was just another low-end car from the multitude of regional manufacturers in this country. In 1914 Ford separated itself from its rivals and became (for a while) the world’s largest industrial concern as the result of the Model T’s assembly switching from small teams of craftsmen assembling each car to a moving assembly line of unskilled workers each contributing the same small bit to every car on the line. Construction time to build each car plunged from 12 hours and 30 minutes to 93 minutes, and the car’s price fell from $690 to $360, while annual sales mushroomed almost ten-fold and Ford doubled workers’ salaries to $5 a day.
1930 Motorola car radio
Next time a boom car rattles your windows at a stop light, think back to the days before Paul and Joseph Galvin developed the first commercially available car radio in 1930.
The Motorola car radio overcame a host of challenges, including electrical interference, finding space in the car for the bulky radio components and making the radio durable enough to survive the pounding of primitive roads. The popular 5T71 radio debuted at the Radio Manufacturers Association convention in Atlantic City, N.J., following a demonstration drive from Chicago to prove its durability.
1940 Oldsmobile Hydra-Matic transmission
Today few new cars are sold in the U.S. with a manual transmission and a dwindling portion of the population even knows how to use one. We can credit this dismal state of affairs to the invention of the automatic transmission and its debut in the 1940 Oldsmobile.
The original Hydra-Matic automatic transmission offered benefits in terms of efficiency that surpassed subsequent designs, but that approach was abandoned in pursuit of smoother gear changes, which were more important to drivers. The company touted the ability to navigate stop and go traffic and to park without stalling the engine as the automatic’s primary benefits, and those features continue to drive the technology’s appeal today.
1946 Michelin radial tire
Until Michelin developed the radial, tire design had evolved little from the dawn of the car industry. The radial moniker refers to the direction of the reinforcing belts, which are turned perpendicular rather than running parallel to the direction of travel as in bias-ply designs.
The benefits include a more stable footprint, reduced fuel consumption, longer tread life and better handling. The near-absence of any kind of maintenance or attention required led the government to mandate tire pressure monitors in cars because drivers had long since stopped checking the condition of their tires.
1959 Volvo three-point seat belt
Volvo engineer Nils Bohlin invented the three-point seatbelt in 1959. The belt appeared in the automaker’s cars that year, and within a decade the belts were mandatory equipment in all cars sold in the United States.
Bohlin’s background was in aviation, where he developed ejection seats, so he understood the necessity of securing the torso and not just the pelvis as the lap belt had done. The elegant simplicity of his solution is confirmed by the inability of newer seat belt designs to displace the three-point seatbelt 50 years on.
1972 General Motors air bag
While air bags didn’t become commonplace in cars until the 1990s, GM conducted a large field test of 1,000 1972 Chevrolet Impalas equipped with experimental air bags. Between 1974 and 1976, the company offered the world’s first production air bags in its cars, with the first appearing in a 1974 Oldsmobile Toronado. Though the company was prepared to build 100,000 air bag-equipped cars a year, only 10,321 were sold over three years despite a reasonable price of between $180 and $300 for the option.
The Insurance Institute for Highway Safety confirmed the robust construction of the early system by testing two of the old cars in the 1990s. Neither car ran and even the radio and clock didn’t work in one, but the air bags still deployed perfectly in the institute’s crash lab.
“What’s important to remember at this point is that the air bags GM put into those early cars worked fine,” wrote IIHS president Brian O’Neill in a 1993 letter to the New York Times.
1995 BMW and Mercedes-Benz electronic stability control
These premium carmakers battled to be the first to introduce an electronic stability control system that automatically stabilizes a car in the event of a slide. Though these expensive V-12 models were the first to feature stability control, they quickly verified the technology’s value with significant reductions in crashes. Subsequent studies showed that stability control-equipped cars are about one-third less likely to suffer a fatal crash, a result that encouraged the U.S. government to mandate stability control for all cars starting in model year 2012. The real safety advantage of stability control is that in contrast to seat belts and air bags, which mitigate the damage that occurs in a crash, stability control prevents many crashes from happening in the first place.
1996 OnStar telematics
In our increasingly connected wireless world, the notion that the car should connect to a network over which it can share information may seem like an obvious development. But it was less obvious in 1996 when GM’s OnStar division was launched, using analog cellular telephone technology to send information to drivers and to automatically report crashes.
Today other carmakers have their own telematics services and each month OnStar is now responding to 2,300 crashes, 10,000 requests for emergency assistance and nearly 30,000 requests for roadside assistance.
Copyright 2012 Thomson Reuters. Click for restrictions.
Video: Road rage apps
Data: Latest rates in the US
|Mortgage rates||View rates in your area|
|30 yr fixed mtg||4.01%|
|15 yr fixed mtg||3.19%|
|30 yr fixed jumbo mtg||4.52%|
|Auto rates||View rates in your area|
|48 month new car loan||3.35%|
|36 month used car loan||3.45%|
|36 month new car loan||3.20%|
|Home equity rates||View rates in your area|
|Home equity type||Today||+/-||Chart|
|$30K HELOC FICO||4.78%|
|$30K home equity loan FICO||4.76%|
|$75K home equity loan FICO||4.31%|
|Credit card rates||View more rates|
|Card type||Today||+/-||Last Week|
|Low Interest Cards||12.68%||12.61%|
|Cash Back Cards||17.67%||17.39%|
|Savings rates||View rates in your area|
|Money market account||0.32%|
|$10K Money market account||0.27%|
|6 month CD||0.38%|